Products
-
Sinotruk Tail Marker Light WG9925720005
-
Headlight Sinotruk WG9719720001
-
Cabin air shock absorber AZ1642440085
-
Sinotruk Howo Propeller Shaft Flange AZ9128320014
-
Front Bumper WG1642241021 for Sinotruk HOWO
-
Stabilizer bushing Sinotruk 199100680067
-
Piston VG1560037011
-
Flywheel 612600020416 Sinotruck
-
Generator A3008-3701100 Yuchai
-
Flywheel 612630020051
-
Electronic gas pedal H4117030001A0 Cummins
-
Front leaf spring assembly DZ95319690914 SHACMAN
-
Bolt with tooth nut 805002221/01B1529+03B0047
-
Water pump VG1500060051
-
Rear brake pad assembly 2401.31G1-085/185
-
Block headlight DZ97189723221 SHACMAN
Expansion tank DZ9114530260 Shacman
Coolant expansion tank DZ9114530260 for Shacman trucks. Compensates for changes in the volume of antifreeze during engine heating/cooling, maintains pressure in the cooling system, and is suitable for replacing the original.
Description
marker
Coolant expansion tank DZ9114530260 for Shacman trucks - reliable replacement of the original
When your Shacman truck's engine is running at full power, the cooling system is put under tremendous stress. Antifreeze heats up, expands and requires space - this is where antifreeze comes in.coolant expansion tank DZ9114530260. This component is not just a container for liquid - it stabilizes pressure, compensates for thermal expansion and protects the entire cooling system from overloads. Manufactured at Mettlead under strict quality control, this cistern is exactly the same as the original part and is ready to install without any modifications.
Functional advantages of expansion tank DZ9114530260
Compensation for thermal expansion of antifreeze
When the engine heats up, the volume of coolant increases to 5–7%. The expansion tank DZ9114530260 takes on this excess volume, preventing rupture of pipes and damage to the radiator. When the engine cools, the fluid returns back to the system - the cycle operates continuously and stably.
Maintaining optimal pressure in the cooling system
The tank is equipped with a special lid with a pressure regulation valve. Thanks to this, a constant operating pressure is maintained in the cooling circuit, which increases the boiling point of the antifreeze and increases the efficiency of heat removal. The result is that the engine operates in the optimal temperature range even under harsh operating conditions.
Full compatibility with the original
The DZ9114530260 expansion tank from Mettlead is designed as an exact replacement for the original Shacman part. All mounting holes, hose connection fittings and dimensions completely match the factory specifications. Installation takes minimal time and does not require modification of brackets or pipes.
Durability of materials
The tank body is made of high-strength polymer material that is resistant to aggressive antifreeze components, temperature changes and vibration. The walls of the tank remain transparent for visual monitoring of the liquid level throughout its entire service life.
Technical characteristics of expansion tank DZ9114530260
| Parameter | Meaning |
|---|---|
| OEM number | DZ9114530260 |
| Applicability | Shacman Trucks (Shaanxi) |
| Part type | Cooling system expansion tank |
| Housing material | High strength polypropylene (PP) |
| Operating temperature | -40°C to +120°C |
| Working pressure | 0.9–1.2 bar |
| Cover type | With pressure regulation valve |
| Installation | Direct replacement for the original (bolt-on) |
| Quality control | 100% leak test |
| Manufacturer | Mettlead (China) |
| Packaging | Neutral / customized upon request |
Application and compatibility: which models are suitable
Coolant expansion tank DZ9114530260 designed specifically for the heavy duty truck rangeShacman (Shaanxi Automobile). Here are the main areas where this part is used:
- Shacman F2000— long-haul tractors and dump trucks with Weichai engines
- Shacman F3000– heavy construction and quarry equipment
- Shacman X3000— modern models for long-distance transportation
- Shacman M3000- medium-duty trucks with a cooling system of a similar configuration
In addition, the tank is suitable for Shacman modifications with Weichai WP10, WP12 and Cummins ISM engines that use a cooling system with an expansion tank of this size. It is recommended to check the OEM number before orderingDZ9114530260with a spare parts catalog for your specific model.
Mettlead OEM/ODM capabilities
Individual packaging and white label
Mettlead offers flexible terms for distributors and wholesalers. You can order the expansion tank DZ9114530260 with your logo printed on the packaging or directly on the product. White-label allows you to integrate the product into your line of spare parts without unnecessary production costs.
Strict quality control
Each tank undergoes a multi-step inspection: visual inspection, pressure leak test, dimensional tolerance check and cyclic load resistance test. Only after this the product receives approval for shipment. Thanks to this approach, the defect rate is less than 0.3%.
The factory is open to visitors
Mettlead invites partners to visit the production site in China in person. You will be able to evaluate the quality of equipment, control processes and ensure the reliability of the supplier before concluding a contract.
Customer case: expansion tank DZ9114530260 for a vehicle fleet in Central Asia
A transport company from Uzbekistan operates a fleet of 45 Shacman F3000 trucks on the Tashkent-Navoi-Bukhara routes. In conditions of a sharply continental climate (from -25°C in winter to +48°C in summer), the original expansion tanks began to crack after two years of operation. Antifreeze leaks led to overheating of engines, unplanned downtime and costly repairs.
After switching to expansion tanks DZ9114530260 manufactured by Mettlead, the situation changed dramatically. Over 18 months of operation, not a single tank from a batch of 60 pieces failed. The body material reliably withstands temperature changes, and the lid valve stably maintains pressure in the cooling system. According to the company's chief engineer, cooling system maintenance costs have decreased by 40%, and equipment downtime has been reduced by 12 working days per season.
Frequently asked questions about expansion tank DZ9114530260
How is the DZ9114530260 expansion tank from Mettlead different from the original Shacman?
In terms of size, shape and mounting points, this is a complete analogue of the original. However, Mettlead uses an advanced polymer composition with increased resistance to UV radiation and cyclic loads. This means that with an identical fit, the part lasts longer in harsh climatic conditions.
How to determine that the expansion tank needs to be replaced?
Pay attention to the following signs: visible cracks or clouding of the walls of the tank, traces of antifreeze leakage in the mounting area, a constant decrease in the fluid level without visible leaks at other points in the system, as well as deformation of the housing. If the tank cap does not hold pressure, the valve releases antifreeze - this is also a signal for replacement.
Is it possible to install the DZ9114530260 tank yourself?
Yes, replacing the expansion tank is one of the simplest cooling system maintenance procedures. It is enough to drain some of the antifreeze below the level of the tank, disconnect the hoses, remove the old tank from the bracket and install the new one in the reverse order. The whole process takes 20–40 minutes. However, it is recommended to carry out work with a cool engine and in compliance with safety precautions.
What antifreeze is recommended to use with this tank?
The DZ9114530260 reservoir is compatible with all types of coolants recommended for Shacman trucks: ethylene glycol antifreeze grades G11, G12, G12+ and G13. The body material is chemically inert to all common antifreeze formulations, including carboxylate and hybrid formulas.
What is the minimum order quantity for wholesale buyers?
Mettlead works with both large distributors and small service stations. The minimum order quantity is discussed individually - contact us to receive the current price list and delivery conditions for the expansion tank DZ9114530260.
Get a commercial offer for expansion tank DZ9114530260
Are you looking for a reliable supplier of DZ9114530260 coolant expansion tanks for Shacman trucks? Mettlead offers factory prices, proven quality and fast logistics. We are ready to discuss the terms of OEM packaging, volume discounts and regular deliveries.
Contact us now:
- Fill out the request form on the website - response within 24 hours
- Specify the required quantity, desired delivery time and packaging requirements
- Receive a personal commercial offer with a CIF/FOB price
Mettlead is your direct route to quality Shacman parts from China.
contact us
Related Popular Products
Sinotruk HOWO Engine Parts: Cylinder Block 61500010383
Cylinder block number 61500010383 is a key engine spare part for Sinotruk HOWO trucks. Made from high-quality cast metal, designed for high workloads, fully consistent with factory dimensions to replace the original.
Multifunctional window and mirror control switch DZ97189585110 SHACMAN
DZ97189585110 Multifunction Switch for Shacman Trucks. Controls raising the windows and adjusting the side mirrors of the cabin, is made of durable plastic, corresponds to standard connectors for quickly replacing a failed element of the cabin electrical supply.
Aluminum Alloy Gas Storage Cylinder DZ97189361058 SHACMAN
Aluminum gas cylinder DZ97189361058 for Shacman trucks. Lightweight alloy construction provides reliable storage of compressed air from the pneumatic system, is resistant to corrosion and operating pressure, and meets factory fitting dimensions to replace the original.
Bolt with tooth nut 805002221/01B1529+03B0047
Tooth bolt and nut kit 805002221/01B1529+03B0047. Fastening element for transmission gears, withstands mechanical loads, suitable for replacing standard parts.
Block headlight DZ97189723221 SHACMAN
Block headlight DZ97189723221 for Shacman truck cab. A complex lighting element that combines low/high beam and side lights, the housing is resistant to vibrations and weather influences, standard mounting dimensions for quick replacement of the original.
Oil pump VG1500070021
Oil pump VG1500070021 for Sinotruk Howo engines. Provides a forced supply of engine oil to all rubbing components of the engine, maintains stable lubricant pressure, and is suitable for direct replacement of the original.
Transmission input shaft JS180A-1701030-1 FAW
Primary shaft of the JS180A-1701030-1 gearbox for FAW trucks. Made from hardened alloy steel, it takes torque from the clutch and transmits it to the gearbox, and is factory sized to replace a worn transmission part.
Hydraulic shock absorber DZ13241440080 SHACMAN
Hydraulic shock absorber DZ13241440080 for Shacman truck cab. Absorbs vibration loads from the cabin suspension, reduces body sway while driving, the body is resistant to wear and adverse weather conditions, the seating dimensions are completely identical to the original for quick replacement.
LED Tail Light DZ95189811211 for SHACMAN
DZ95189811211 LED Tail Light for Shacman Trucks. The combined element includes side lighting, brake light and turn signal. The sealed housing protects against moisture, dust and temperature changes; standard fastenings ensure easy replacement of the original part.
Turbine (Turbocompressor) VG1540110066
Spare parts for Sinotruk Howo truck engines. Injects air into the engine combustion chambers, increases engine power, and optimizes fuel consumption. Completely matches the geometric and technical parameters of the original, suitable for direct replacement of a worn turbine.
Bolt with tooth nut 805002221/01B1529+03B0047
Set of bolt and nut for fastening teeth art. 805002221, 01B1529+03B0047. Parts made of hardened steel, high tensile strength, are used when repairing transmissions of trucks.
Brake drum WG4075450001 Sinotruk
Brake drum WG4075450001 for Sinotruk trucks. The durable cast iron body is resistant to wear and overheating and meets factory specifications for replacing the original brake system.
Handbrake valve 10H4353070001A0
Handbrake valve 10H4353070001A0. Responsible for supplying compressed air to the parking brake, dimensions suitable for replacing the original.
Engine block 61500010373
Narrow cylinder block assembly art. 61500010373 for Weichai engines. Cast from high-strength cast iron, ready for installation, meets factory dimensions, suitable for repairing power units of trucks.
Main brake cylinder (pneumatic hydraulic booster) 4120000675074
Main brake cylinder with pneumatic hydraulic booster 4120000675074 for trucks. Strengthens the force on the brake pedal, transfers operating pressure to the brake system, standard mounting dimensions to replace the original brake unit part.
Air shock absorber DZ14251440060 for SHACMAN
Pneumatic shock absorber DZ14251440060 for Shacman truck cab. Dampenes vibrations and shocks of the cab suspension when driving, increases driver comfort, is resistant to loads and changes in weather conditions, standard fasteners for quickly replacing worn parts.
