Products
-
Center differential assembly WG9231320266
-
Front Bumper WG1642241021 for Sinotruk HOWO
-
Brake drum 81.50110.0142 SHACMAN
-
Brake drum WG9761450001 Sinotruk
-
Front leaf spring assembly DZ95319690914 SHACMAN
-
Front bumper assembly DZ97259623222+DZ97259623236+DZ97259623221 Shacman
-
Main brake cylinder (pneumatic hydraulic booster) LG22-JLB SDLG 4120000675
-
Bevel gear 28-17 199014320251 Sinotruk
-
Balancer pin bushing 25020049
-
Brake drum 81.50110.0232 SHACMAN
-
Brake drum WG4075450001 Sinotruk
-
Oil pump VG1500070021
-
Rear engine mounting cushion AZ9725590031
-
Hydraulic distributor JDF25.2C-16/4120000414/12C0087
-
Clutch main cylinder H4163030000A0
-
Oil cooler 61500010334
LED Tail Light DZ95189811212 for SHACMAN
LED tail light DZ95189811212 for Shacman truck. Combines a brake light, a parking light and a turn signal, LEDs have a long service life and low power consumption, a sealed housing protects against moisture and dust, standard fasteners for direct replacement of the original.
Description
marker
LED tail light DZ95189811212 for SHACMAN - original quality from the manufacturer
If you are looking for a reliableLED tail light DZ95189811212 for SHACMAN, which will last thousands of kilometers without complaints - you have come to the right place. Mettlead supplies LED lights directly from the factory in China, providing you with factory price without middlemen, strict quality control and fast delivery anywhere in the world. This tail light is designed specifically for SHACMAN trucks and fully complies with OEM specifications, which means it will fit perfectly into its original position without any modifications.
Why choose the DZ95189811212 LED tail light for SHACMAN from Mettlead?
High brightness and visibility
LED technology provides instant on and bright illumination that is visible even in thick fog, heavy rain or darkness at night. Thanks to this, other road users see your truck in advance, which significantly reduces the risk of accidents on the highway.
Extended service life
Unlike traditional incandescent lamps, the LEDs in the DZ95189811212 flashlight are designed for more than 50,000 hours of continuous operation. This means that you will not have to change the light every season - it will last the entire life cycle of the car if used correctly.
Exact compliance with OEM standards
EveryoneLED tail light DZ95189811212 for SHACMANmanufactured in strict accordance with factory drawings and tolerances. Mounting holes, electrical connectors and overall dimensions are identical to the original, so installation takes just a few minutes.
Energy efficiency
LEDs consume significantly less electricity compared to halogen lamps. This reduces the load on the truck’s on-board electrical network and has a positive effect on the battery life.
Resistance to vibrations and shocks
SHACMAN trucks are often used on heavy-duty roads and in quarry conditions. The DZ95189811212 LED flashlight is designed to withstand constant vibration, shock and temperature changes without loss of performance.
Specifications of LED Tail Light DZ95189811212
| Parameter | Meaning |
|---|---|
| OEM number | DZ95189811212 |
| Product type | LED tail light (LED) |
| Applicability | SHACMAN (Shaanxi Automobile) |
| Location | Rear body |
| Voltage | 24 V (DC) |
| Light source | LED (light emitting diodes) |
| Functions | Brake light, turn signal, side light, reverse |
| Housing material | High strength ABS plastic |
| Diffuser material | PC (polycarbonate) |
| Degree of protection | IP67 (dust and moisture protection) |
| Operating temperature | from −40°C to +85°C |
| LED service life | ≥ 50,000 hours |
| Installation | Bolt-on, standard connector |
| Manufacturer | Mettlead (China) |
| Quality control | 100% inspection before shipment |
Scope of application and compatible models
LED Tail Light DZ95189811212 for SHACMANDesigned for installation on Shaanxi (SHACMAN) trucks as a rear combination light. In particular, it is suitable for the following series and configurations:
- SHACMAN F3000 - tractors and dump trucks
- SHACMAN X3000 - long-haul tractors
- SHACMAN H3000 - truck chassis
- Other SHACMAN models using the light with OEM number DZ95189811212
This flashlight belongs to the categorybody lighting partsand is used as the main rear lighting device, providing signaling of braking, maneuvering and indicating the dimensions of the vehicle. Before ordering, we recommend checking the OEM number DZ95189811212 with your vehicle's catalog to confirm compatibility.
OEM/ODM capabilities and customized packaging
Mettlead is more than just a supplier. We offer flexible terms of cooperation for wholesale buyers and distributors of spare parts:
- White-label supplies— we can ship LED tail light DZ95189811212 for SHACMAN under your brand, with your markings and logo on the packaging.
- Individual packaging— a neutral box, branded packaging of your brand or special transport packaging for sea container shipping.
- Strict quality control— each lantern is tested for tightness, electrical parameters and visual inspection before shipping.
- Minimum quantity (MOQ)— discussed individually depending on the volume and conditions of the order.
- Factory visit— we invite partners to personally visit our production to ensure the quality and reliability of the processes.
Customer experience: how the DZ95189811212 LED tail light for SHACMAN solved our partner’s problem
At the beginning of 2024, the purchasing manager of a transport company from Uzbekistan contacted us. His fleet consisted of more than 80 SHACMAN trucks, and every quarter the crew was forced to replace burnt out tail lights on 10-15 vehicles. The cost of downtime and frequent replacements took a significant toll on the budget.
After the first trial batchLED tail lights DZ95189811212 for SHACMANfrom Mettlead, the client noted that after six months of operation, not a single flashlight failed. In addition, the brightness of the glow remained stable even with constant temperature changes in the continental climate. As a result, the company switched to a full supply of LED lights from Mettlead, and lighting maintenance costs were reduced by more than 60%.
“We were looking for a DZ95189811212 LED tail light for SHACMAN at a reasonable price with guaranteed quality. Mettlead offered exactly this - plus fast delivery and competent packaging for international transportation.",” shared the purchasing manager.
FAQ about DZ95189811212 LED Tail Light for SHACMAN
Will the DZ95189811212 light fit my SHACMAN truck without modification?
Yes. The LED rear light DZ95189811212 completely replicates the dimensions, mountings and electrical connector of the original part. Installation is bolt-on-bolt—no additional adapters or wiring modifications are required.
What is the degree of protection of the flashlight from moisture and dust?
The flashlight has a degree of protection IP67. This means that it is completely protected from dust and can withstand short-term immersion in water. For trucks operating in quarries, construction sites and off-road conditions, this is a critical feature.
How brighter is an LED flashlight compared to a regular flashlight?
LEDs provide a more uniform and intense glow with an instant response (no warm-up delay). Visually, the brightness of the brake light increases by approximately 30–40% compared to incandescent lamps, which increases safety on the road.
Can the flashlight operate in extremely low temperatures?
The DZ95189811212 LED tail light for SHACMAN is designed for operation in the range of −40°C to +85°C. It remains fully operational in Siberian frosts and Central Asian heat.
What's included in the package?
The standard kit includes one LED tail light DZ95189811212 in individual protective packaging. Fasteners and seals included. Additional accessories can be supplied upon request.
What is the warranty period for the flashlight?
The warranty period is discussed when placing an order and depends on the volume of the batch. We provide a warranty against manufacturing defects as standard. Each product undergoes 100% inspection before shipment, so the percentage of defects is minimal.
Order LED Tail Light DZ95189811212 for SHACMAN today
Don't waste time looking for unreliable suppliers. Mettlead offers youfactory prices without intermediaries, a full range of spare parts for SHACMAN and other Chinese trucks, as well as a personal manager who will answer all technical questions.
Submit your request now— indicate the required quantity, your car model and preferred delivery method. We will prepare a commercial offer with the best price within 24 hours.
contact us
Related Popular Products
Flywheel 612600020416 Sinotruck
Flywheel art. 612600020416 for Sinotruk engines. The cast iron transmission part accumulates the rotational inertia of the crankshaft, ensures smooth operation of the engine and interaction with the clutch disc, and corresponds to factory dimensions for replacing a worn unit.
Expansion tank DZ9114530260 Shacman
Coolant expansion tank DZ9114530260 for Shacman trucks. Compensates for changes in the volume of antifreeze during engine heating/cooling, maintains pressure in the cooling system, and is suitable for replacing the original.
Brake drum WG9231342006 Sinotruk
Brake drum art.WG9231342006 for Sinotruk trucks. Made of durable cast iron, resistant to overheating and abrasion, fully compatible with fitting dimensions for replacing a standard brake system part.
Stabilizer bushing Sinotruk 199100680068
Stabilizer bushing art. 199100680068 for Sinotruk trucks. Made of wear-resistant rubber, absorbs vibrations, corresponds to the original dimensions for replacement when repairing the suspension.
Front Bumper WG1642241021 for Sinotruk HOWO
Front bumper WG1642241021 for Sinotruk HOWO trucks. An original part made of durable material, resistant to corrosion, precise fit, has holes for fog lights.
Hydraulic lock assembly DZ13241440190 Shacman
Hydraulic Lock Assembly DZ13241440190 for Shacman Trucks. Fixes the position of the hydraulic cylinder, prevents spontaneous movement of the rod under load, and is suitable for repairing the hydraulic system of body equipment.
LED Tail Light DZ95189811211 for SHACMAN
DZ95189811211 LED Tail Light for Shacman Trucks. The combined element includes side lighting, brake light and turn signal. The sealed housing protects against moisture, dust and temperature changes; standard fastenings ensure easy replacement of the original part.
Brake drum 3104102-HF15014 FOTON
Brake drum 3104102-HF15014 for FOTON truck. Dissipate heat when braking, interact with the brake pads, suitable for replacing the factory part.
Flywheel 612630020051
Flywheel 612630020051 for Sinotruk engines. Accumulates the rotational inertia of the crankshaft, serves as the contact surface of the clutch disc, and is suitable for direct replacement of the original part.
Gear shift cylinder 627207001
Gear shift cylinder art. 627207001 for trucks. Responsible for the pneumatic gear shift drive in the gearbox, ensures clear gear shifting, fully compliant with factory dimensions to replace the original part.
Rear engine mounting cushion AZ9725590031
Rear engine mount AZ9725590031 for Sinotruk Howo. Dampens vibrations of the power unit, securely fixes the motor to the truck frame, all dimensions and mounting points are the same as the original for easy replacement.
Flange KOHM QH50-4211206-12
Flange KOHM QH50-4211206-12. Made of high-strength alloy, the connecting part of the gearbox power take-off allows for the installation of a hydraulic pump, standard mounting dimensions to replace the original.
Brake pedal valve H4355120001A0
Under-pedal brake valve H4355120001A0. Controls the supply of compressed air to the brake system when the pedal is pressed, meets factory dimensions to replace the original.
Brake drum WG9761450001 Sinotruk
Brake drum WG9761450001 for Sinotruk trucks. Cast from wear-resistant cast iron, withstands intense braking loads, true to original dimensions for replacement in the brake system.
Front bumper assembly DZ97259623222+DZ97259623236+DZ97259623221 Shacman
Front bumper assembly kit with part numbers DZ97259623222, DZ97259623236, DZ97259623221 for Shacman trucks. The durable metal structure protects the front part of the equipment from mechanical damage and completely replicates the factory geometric dimensions for installation to replace the damaged original.
