Products
-
Flywheel 612600020416 Sinotruck
-
Electronic gas pedal H4117030001A0 Cummins
-
Brake drum WG9761450001 Sinotruk
-
Aluminum Alloy Gas Storage Cylinder DZ97189361058 SHACMAN
-
Multifunctional window and mirror control switch DZ97189585110 SHACMAN
-
Headlight Sinotruk WG9719720001
-
Balancer pin bushing 25020049
-
Connecting rod bushing 4110000054124/630-1004052
-
Center differential assembly WG9231320266
-
Engine connecting rod 161500030009
-
Brake drum AZ9112340006 Sinotruk
-
Engine flywheel AZ1540020205
-
Hydraulic distributor JDF25.2C-16/4120000414/12C0087
-
Solenoid valve ABS 3550310-50A
-
Bolt with tooth nut 805002221/01B1529+03B0047
-
Brake drum WG4075450001 Sinotruk
front driveshaft 251800154
Front driveshaft art. 251800154 for special cargo vehicles. Made from high strength steel, transmits torque to transmission, factory sized to replace worn drive part.
Description
marker
Front driveshaft 251800154 - reliable transmission of torque for your equipment
When it comes to the smooth operation of heavy equipment transmissions, every drive element must be flawless.Front driveshaft 251800154- This is a key link that ensures stable power transmission from the gearbox to the front axle. That is why experienced buyers choose original parameters and proven quality, rather than dubious analogues. CompanyMettleadsupplies this unit directly from its factory in China, guaranteeing competitive pricing, exact specification and fast delivery anywhere in the world.
Functional advantages of front propeller shaft 251800154
Before placing an order, it is important to understand what real benefits you are getting. Below are the key characteristics that make it stand outfront driveshaft 251800154among competitive offers:
- Exact OEM sizing— the shaft is manufactured strictly according to factory drawings, so installation does not require modifications or additional adjustments.
- High strength alloy steel— the material of the pipe and forks withstands extreme torques and vibration loads of severe operating conditions.
- Factory Balancing— each driveshaft undergoes dynamic balancing, which eliminates runout and premature wear of bearings.
- Corrosion protection— the surface is treated with an anti-corrosion coating, which extends the service life even when working in aggressive environments.
- Increased resource of crosspieces— the cardan joint crosspieces are equipped with needle bearings with improved lubrication, which significantly reduces maintenance intervals.
Thus, choosingfront driveshaft 251800154from Mettlead, you get a part ready for immediate installation and long trouble-free operation.
Specifications
For easy comparison with your requirements, we have collected the main parameters in a table. Pay attention to the accuracy of the data - each figure corresponds to the factory specification.
| Parameter | Meaning |
|---|---|
| Part Number | 251800154 |
| Component type | Front driveshaft (front drive shaft) |
| Pipe material | Alloy steel with heat treatment |
| Hinge type | Cross with needle bearings |
| Balancing | Dynamic, factory |
| Surface coating | Anti-corrosion (phosphating + painting) |
| Applicability | Heavy construction and road equipment made in China |
| Manufacturer | Mettlead (China, factory supplied) |
| Packaging | Neutral / upon customer request (White-label) |
| Quality guarantee | Strict control at every stage of production |
Scope of application: where the front driveshaft is used 251800154
This front driveshaft is designed for heavy duty transmission applications where drive reliability is critical. Here are the main scenarios for its use:
- Construction equipment— front loaders, bulldozers and motor graders operating on unprepared soils.
- Mining trucks— front-wheel drive, providing stability on climbs and in off-road conditions.
- Road construction machines— rollers, asphalt pavers and other special equipment with all-wheel drive.
- Heavy trucks- models with a front drive axle, where the cardan shaft 251800154 is a standard unit.
Due to compatibility with original fitting dimensions,front driveshaft 251800154integrates into the transmission without any modifications, saving you time and money on equipment downtime.
OEM/ODM capabilities and supply flexibility
Mettlead is not just a spare parts supplier, but a full-fledged partner for your business. Here's what we offer in addition to standard supplies:
- White-label packaging— we will put your logo and markings on the box so that you can promote your own brand in the local market.
- Individual configuration— if necessary, the shaft is supplied assembled with crosspieces, a suspended bearing or flanges for non-standard axles.
- Strict quality control— each batch is checked for dimensions, material hardness and dynamic balancing before shipment.
- Flexible volumes- from one sample to container lots: we adapt to your purchasing cycles.
- Invitation to production— you can personally visit the plant, verify the quality of the processes and discuss further cooperation.
Customer case: supply of front driveshaft 251800154 to Central Asia
At the beginning of 2024, the purchasing manager of a large service company from Uzbekistan contacted us. His fleet of 40 construction equipment required replacement front driveshafts, and the main problem was consistency of quality over high volume. After discussing the technical specifications, we sent two test samplesfront propeller shaft 251800154.
The client checked the geometry, installed the shafts on the machines, and over 800 operating hours recorded no vibrations or play in the crosspieces. As a result, an annual contract was concluded for the supply of 120 units with neutral packaging under the customer’s brand. Delivery time was 12 days to Tashkent, and the total savings compared to the previous supplier reached 18%. This example clearly shows howfront driveshaft 251800154from Mettlead solves business problems: predictable quality, fast logistics and favorable prices.
Front Driveshaft FAQ 251800154
What is the actual service life of this driveshaft before replacement?
If the recommended intervals for injecting the crosspieces are observed (every 250 operating hours), the front driveshaft 251800154 operates reliably from 5,000 to 8,000 operating hours, depending on operating conditions. Heat-treated steel and high-quality needle bearings ensure long service life without critical wear.
How can you tell if the front driveshaft 251800154 needs to be replaced?
The main symptoms are: noticeable vibration at speed, knocking when starting under load, and play in the crosspieces during manual inspection. If the gap in the hinge exceeds 0.05 mm, it is recommended to replace the entire shaft to avoid damage to the axle and gearbox flanges.
Is the shaft supplied complete with crosspieces?
Yes, the standard package includes the tube, forks and crosspieces assembled, ready to install. However, if you require a shaft without spiders or with spiders from a different brand, we will discuss this individually.
How can I make sure that the part will fit my equipment?
First of all, check the number 251800154 with the catalog of your car. In addition, you can send us a photo of the nameplate or the old shaft - our engineers will confirm compatibility within a few hours.
What packaging is used for transportation?
The front driveshaft 251800154 is packed in a wooden box with shock-absorbing pads to protect it from shock during sea and road transport. Upon request, we use neutral or branded packaging.
Order front driveshaft 251800154 today
Are you looking for a reliable supplier?front propeller shaft 251800154with factory price and fast shipment? Take the first step - submit your request right now. Specify the required volume, desired timing and preferred delivery method, and our manager will prepare a personal commercial offer within 24 hours.
Contact Mettlead— and get competitive conditions for the entire range of drive components for heavy equipment. We work for results, because your downtime is our responsibility.
contact us
Related Popular Products
Multifunctional window and mirror control switch DZ97189585110 SHACMAN
DZ97189585110 Multifunction Switch for Shacman Trucks. Controls raising the windows and adjusting the side mirrors of the cabin, is made of durable plastic, corresponds to standard connectors for quickly replacing a failed element of the cabin electrical supply.
Clutch booster Sinotruk Howo WG9719230025
Clutch booster WG9719230025 for Sinotruk Howo trucks. Reduces the force on the clutch pedal, ensures smooth release of the clutch, and is fully compatible with the original spare part.
Flywheel 612600020416 Sinotruck
Flywheel art. 612600020416 for Sinotruk engines. The cast iron transmission part accumulates the rotational inertia of the crankshaft, ensures smooth operation of the engine and interaction with the clutch disc, and corresponds to factory dimensions for replacing a worn unit.
Aluminum Alloy Gas Storage Cylinder DZ97189361058 SHACMAN
Aluminum gas cylinder DZ97189361058 for Shacman trucks. Lightweight alloy construction provides reliable storage of compressed air from the pneumatic system, is resistant to corrosion and operating pressure, and meets factory fitting dimensions to replace the original.
Hydraulic shock absorber DZ13241440080 SHACMAN
Hydraulic shock absorber DZ13241440080 for Shacman truck cab. Absorbs vibration loads from the cabin suspension, reduces body sway while driving, the body is resistant to wear and adverse weather conditions, the seating dimensions are completely identical to the original for quick replacement.
Electronic gas pedal H4117030001A0 Cummins
Electronic gas pedal H4117030001A0 for Cummins engine. Transmits the throttle position signal to the engine control unit, standard fitting dimensions to replace the original.
Gear shift cylinder 627207001
Gear shift cylinder art. 627207001 for trucks. Responsible for the pneumatic gear shift drive in the gearbox, ensures clear gear shifting, fully compliant with factory dimensions to replace the original part.
Generator 5S9088M ShangChai
Generator art. 5S9088M for ShangChai engines. Generates electricity to power the on-board network of trucks, operates stably under different loads, and is suitable for replacing the original unit.
Tensioner roller mounting bracket Sinotruk WG9931477050
Tensioner pulley bracket art.WG9931477050 for Sinotruk trucks. Robust steel structure, securely fixes the belt roller, suitable for replacing original spare parts when repairing the engine drive.
Headlight Sinotruk 812W25101-6021
The headlight unit with catalog number 812W25101-6021 is designed for Sinotruk trucks. Made to original dimensions, resistant to temperature changes and moisture, suitable for direct replacement of standard car optics.
Brake drum AZ9112340006 Sinotruk
Brake drum AZ9112340006 for Sinotruk trucks. Durable cast iron resists abrasion and high temperatures during braking, and matches original dimensions for quick replacement.
Sinotruk Tail Marker Light WG9925720005
Tail marker light WG9925720005 for Sinotruk trucks. The durable housing is resistant to moisture and temperature changes, standard mounting dimensions for quick replacement of the original part.
Air compressor 630-3509100A
Air compressor art.630-3509100A for truck engines. Creates working air pressure for the car’s pneumatic system, is manufactured according to factory standards, and is suitable for replacing a worn-out original unit.
Bolt with tooth nut 805002221/01B1529+03B0047
Set of bolt and nut for fastening teeth art. 805002221, 01B1529+03B0047. Parts made of hardened steel, high tensile strength, are used when repairing transmissions of trucks.
Bolt with tooth nut 805002221/01B1529+03B0047
Tooth bolt and nut kit 805002221/01B1529+03B0047. Fastening element for transmission gears, withstands mechanical loads, suitable for replacing standard parts.
Cylinder block 61500010373
Cylinder block 61500010373 for Sinotruk engines. The main body part of the motor contains the piston group, lubrication and cooling channels, and fully corresponds to the original dimensions for replacement.
