Products
-
ABS control unit ASR 1417135900003 FOTON
-
Oil cooler 61500010334
-
Hydraulic double-sided lock for XCMG truck crane 803000738
-
Connecting rod bushing 4110000054124/630-1004052
-
Flywheel 612630020051
-
Sinotruk Howo Propeller Shaft Flange AZ9128320014
-
Brake drum AZ9112440001 Sinotruk
-
Engine flywheel AZ1540020205
-
Brake drum 81.50110.0232 SHACMAN
-
Brake drum WG9231342006 Sinotruk
-
Transmission input shaft JS180A-1701030-1 FAW
-
Main brake cylinder (pneumatic hydraulic booster) 800901159 XZ50K-3510002 251804668
-
Generator A3008-3701100 Yuchai
-
Air compressor 630-3509100A
-
Rear brake pad assembly 2401.31G1-085/185
-
Multifunctional window and mirror control switch DZ97189585110 SHACMAN
Electronic gas pedal H4117030001A0 Cummins
Electronic gas pedal H4117030001A0 for Cummins engine. Transmits the throttle position signal to the engine control unit, standard mounting dimensions to replace the original.
Description
marker
Electronic gas pedal H4117030001A0 Cummins - original quality for heavy trucks Foton Auman
When the electronic accelerator signal begins to fail and the engine stops responding to driver commands, every minute of downtime is costly.Electronic gas pedal H4117030001A0 Cumminsbrings instant response and stable communication between driver and powertrain back to your fleet. This part is designed to work with Cummins engines in Foton Auman heavy-duty trucks and provides precise throttle control throughout its life.
CompanyMettleadsupplies this pedal directly from the factory in China, which guarantees a competitive price without intermediaries, fast shipment and strict quality control at every stage of production.
Functional benefits and benefits for your business
Accurate electronic signal transmission
The integrated accelerator pedal position sensor H4117030001A0 transmits an analog signal to the engine control unit (ECU) with minimal error. Thanks to this, the Cummins engine receives correct data on the required power, which means fuel consumption remains optimal and acceleration dynamics are predictable.
Robust design for tough conditions
The pedal body is made of impact-resistant polymer with anti-corrosion coating of the contact elements. The return mechanism has been tested for more than500,000 click cycles, which corresponds to a resource of several years of intensive use on intercity and quarry routes.
Direct compatibility - installation without modifications
The gas pedal H4117030001A0 is a complete analogue of the original part and is installed on standard mounting points. The electrical connector is compatible with the factory wiring of Foton Auman with Cummins engines, so replacement takes no more than 30 minutes without the need for adaptation.
Savings on fleet maintenance
Factory price from Mettlead reduces parts costs by up to30–40%compared to purchasing through regional distributors. At the same time, you get the same part with the same article number - just without extra extra charges.
Technical specification of gas pedal H4117030001A0
| Parameter | Meaning |
|---|---|
| OEM article number | H4117030001A0 |
| Part type | Electronically controlled gas pedal (electronic accelerator) |
| Compatible Engine | Cummins ISG/ISF (series for Foton Auman) |
| Signal type | Analogue (dual potentiometer) |
| Supply voltage | 5 V (from ECU) |
| Output range | 0.5–4.5 V |
| Housing material | Reinforced polyamide (PA66+GF) |
| Connector type | 6-pin, Foton factory standard |
| Resource | ≥ 500,000 cycles |
| Operating temperature | -40°C — +85°C |
| Degree of protection | IP67 |
| Production | China (Mettlead manufacturer) |
Application and Compatibility
Suitable cars
Electronic gas pedal H4117030001A0 CumminsDesigned for the following vehicles:
- Foton Auman GTL with Cummins ISG engine
- Foton Auman EST with Cummins ISG engine
- Foton Auman ETX with Cummins ISF/ISG engine
Typical replacement scenarios
Here are the most common situations that require installing a new gas pedal H4117030001A0:
- Electronic accelerator signal anomaly— the control unit records an error code on the pedal position sensor, the car goes into emergency mode with limited speed.
- Mechanical damage to the pedal— a crack in the housing, a broken return spring, or play in the hinge unit after long-term use.
- Corrosion of connector contacts— moisture ingress leads to an unstable signal and “twitching” when accelerating.
- Scheduled replacement as part of maintenance— preventive installation of a new pedal after 300,000+ km to prevent sudden failures during the trip.
Mettlead OEM/ODM capabilities
Flexible labeling and packaging
We understand that distributors and retailers need products under their own brand. Therefore Mettlead offers:
- White-label supplies— gas pedal H4117030001A0 in neutral packaging, ready for your branding.
- Custom Packaging— application of your logo, individual box design, inserts with instructions in the desired language.
- Engraving of the article— the ability to place your internal number on the body of the part.
Quality control
Each batch of H4117030001A0 gas pedals undergoes a multi-stage test:
- Incoming inspection of raw materials and electronic components.
- Testing the sensor signal on a bench (checking linearity and repeatability).
- Mechanical fatigue tests (cyclic loads).
- Checking the tightness of the connector (IP67).
- Final visual inspection and packaging.
Client case: supply of gas pedals H4117030001A0 Cummins for a fleet in Central Asia
At the beginning of 2024, the purchasing manager of a transport company from Uzbekistan contacted us. His fleet consisted of more than 80 Foton Auman trucks with Cummins engines, and every month 5-7 vehicles were out of order due to failureelectronically controlled gas pedals H4117030001A0. The on-board computer recorded an error in the accelerator sensor, the car went into emergency mode - and the flight was aborted.
Previously, the company purchased this part through a local intermediary, but delivery times reached 4-6 weeks, and the price per unit was almost doubled. After the first trial order from Mettlead (lot of 20 pieces), the customer noted three key improvements:
- Price decreased by 38%through direct factory deliveries without a chain of intermediaries.
- Delivery time reduced to 12 days— from confirmation of payment to receipt at the warehouse in Tashkent.
- Not a single return due to defects— all 20 H4117030001A0 Cummins gas pedals passed the incoming inspection and were installed without any comments.
Today, the company places quarterly orders for 50+ units and is considering expanding its purchasing mix through Mettlead.
Frequently asked questions about H4117030001A0 Cummins accelerator pedal
How does an electronically controlled gas pedal differ from a mechanical one?
Unlike a mechanical cable drive,electronic gas pedal H4117030001A0converts the angle of pressure into an electrical signal that goes directly to the ECU of the Cummins engine. This provides more precise fuel metering, smooth response and integration with cruise control and ABS systems.
How to determine that the gas pedal H4117030001A0 is faulty?
Main symptoms of a malfunction:
- The engine does not respond to pedal pressure or responds with a delay.
- The Check Engine light on the instrument panel comes on with codes P2135, P2138 or P2122.
- The car spontaneously limits the speed to 1200–1500 rpm (emergency mode).
- The speed “floats” when the pedal position is fixed.
Will this gas pedal fit other brands of trucks besides Foton Auman?
Article number H4117030001A0 is designed specifically for the Foton Auman platform with Cummins engines. However, if your truck of another brand uses a similar Cummins control unit and the same type of connector, compatibility is possible - we recommend checking with our engineers before ordering.
What is the service life of the H4117030001A0 gas pedal from Mettlead?
Factory tests confirm a service life of at least500,000 click cycles. With average intensity of operation on main routes, this corresponds to 3–5 years of service without loss of signal accuracy.
Is it possible to install the H4117030001A0 pedal by yourself?
Yes, replacement does not require special equipment. It is enough to disconnect the connector of the old pedal, remove the two mounting bolts, install the new part and connect the plug. The whole process takes 20–30 minutes. However, after installation, it is recommended to carry out an adaptation via a diagnostic scanner to calibrate the zero position.
Ready to get the best price on H4117030001A0 Cummins Throttle Pedal?
Every day a truck is down is lost revenue. Don't let a faulty accelerator pedal slow down your business.
Contact Mettlead nowto:
- Get the current factory price for H4117030001A0 Cummins accelerator pedal based on your volume.
- Check production and delivery times to your region.
- Discuss the terms of white-label packaging and long-term cooperation.
- Request a sample for testing before large order.
Submit your request today and receive a quote within 24 hours.We also invite you to visit our production facility in China to see for yourself the quality of our products and the reliability of our partnership with Mettlead.
contact us
Related Popular Products
Front engine mount WG1680590095
Front Engine Mount WG1680590095 for Sinotruk Howo. It dampens vibrations and noise of the power unit, fixes the motor on the truck frame, and is fully compatible with the original part.
Flange KOHM QH50-4211206-12
Flange KOHM QH50-4211206-12. Made of high-strength alloy, the connecting part of the gearbox power take-off allows for the installation of a hydraulic pump, standard mounting dimensions to replace the original.
Rear brake pad assembly 2401.31G1-085/185
Rear brake pad assembly 2401.31G1-085/185. Creates braking force upon contact with the drum, standard sizes to replace the original.
Engine connecting rod 161500030009
Engine connecting rod 161500030009 for Sinotruk engines. Transmits force from the piston to the crankshaft, withstands high loads during engine operation, and fully complies with the original dimensions for replacing a worn part.
Brake drum 81.50110.0142 SHACMAN
Brake drum 81.50110.0142 for Shacman truck. Durable cast iron brake system element, works in tandem with brake pads, dissipates heat during braking, is resistant to wear and temperature overload, suitable for direct replacement of standard chassis parts.
Main brake cylinder (pneumatic hydraulic booster) 800901159 XZ50K-3510002 251804668
Main brake cylinder with pneumatic hydraulic booster numbered 800901159, XZ50K-3510002, 251804668 for special equipment. Ensures stable operation of the brake system, is made of high-quality materials, and is suitable for replacing a worn-out original unit.
Flywheel 612600020416 Sinotruck
Flywheel art. 612600020416 for Sinotruk engines. The cast iron transmission part accumulates the rotational inertia of the crankshaft, ensures smooth operation of the engine and interaction with the clutch disc, and corresponds to factory dimensions for replacing a worn unit.
Gear shift cylinder 627207001
Gear shift cylinder art. 627207001 for trucks. Responsible for the pneumatic gear shift drive in the gearbox, ensures clear gear shifting, fully compliant with factory dimensions to replace the original part.
LED Tail Light DZ95189811211 for SHACMAN
DZ95189811211 LED Tail Light for Shacman Trucks. The combined element includes side lighting, brake light and turn signal. The sealed housing protects against moisture, dust and temperature changes; standard fastenings ensure easy replacement of the original part.
Brake drum AZ9112440001 Sinotruk
Brake drum AZ9112440001 for Sinotruk trucks. Made of wear-resistant cast iron, withstands heavy loads during braking, suitable for standard replacement of worn parts.
Oil pump VG1500070021
Oil pump VG1500070021 for Sinotruk Howo engines. Provides a forced supply of engine oil to all rubbing components of the engine, maintains stable lubricant pressure, and is suitable for direct replacement of the original.
Front bumper assembly DZ97259623222+DZ97259623236+DZ97259623221 Shacman
Front bumper assembly kit with part numbers DZ97259623222, DZ97259623236, DZ97259623221 for Shacman trucks. The durable metal structure protects the front part of the equipment from mechanical damage and completely replicates the factory geometric dimensions for installation to replace the damaged original.
Bevel gear 28-17 199014320251 Sinotruk
Bevel gear 28-17 art. 199014320251 for Sinotruk trucks. It is part of the main drive of the bridge, transmits torque at an angle, meets factory parameters to replace the original.
Aluminum Alloy Gas Storage Cylinder DZ97189361058 SHACMAN
Aluminum gas cylinder DZ97189361058 for Shacman trucks. Lightweight alloy construction provides reliable storage of compressed air from the pneumatic system, is resistant to corrosion and operating pressure, and meets factory fitting dimensions to replace the original.
Stabilizer bushing Sinotruk 199100680067
Stabilizer bushing with number 199100680067 for Sinotruk trucks. Made from high-quality rubber, it reduces suspension vibrations and is fully sized to replace a worn part.
LED Tail Light DZ95189811212 for SHACMAN
LED tail light DZ95189811212 for Shacman truck. Combines a brake light, a parking light and a turn signal, LEDs have a long service life and low power consumption, a sealed housing protects against moisture and dust, standard fasteners for direct replacement of the original.
