Products
-
Oil cooler 61500010334
-
Bevel gear 28-17 199014320251 Sinotruk
-
Turbine (Turbocompressor) VG1540110066
-
Air compressor 630-3509100A
-
Solenoid valve ABS 3550310-50A
-
Headlight Sinotruk 812W25101-6021
-
Multifunctional window and mirror control switch DZ97189585110 SHACMAN
-
Engine front mount cushion H0101020009A0
-
Sinotruk Tail Marker Light WG9925720005
-
Aluminum Alloy Gas Storage Cylinder DZ97189361058 SHACMAN
-
Front leaf spring assembly DZ95319690914 SHACMAN
-
LED Tail Light DZ95189811212 for SHACMAN
-
Clutch booster Sinotruk Howo WG9719230025
-
Bolt with tooth nut 805002221/01B1529+03B0047
-
Water pump VG1500060051
-
Block headlight DZ97189723221 SHACMAN
LED Tail Light DZ95189811211 for SHACMAN
DZ95189811211 LED Tail Light for Shacman Trucks. The combined element includes side lighting, brake light and turn signal. The sealed housing protects against moisture, dust and temperature changes; standard fastenings ensure easy replacement of the original part.
Description
marker
LED tail light DZ95189811211 for SHACMAN - original quality at factory price
When it comes to road safety, every detail matters.LED Tail Light DZ95189811211 for SHACMANis a reliable element of lighting technology that provides bright and stable indication in any operating conditions. Thanks to direct deliveries from the factory, you receive an original product without overpayments to intermediaries. What's more, the proven design of this light ensures long-lasting performance even under heavy truck use.
Why choose DZ95189811211 LED Tail Light for SHACMAN
First of all, this lamp is designed specifically for SHACMAN (陕汽) trucks, which means it is ideally suited in terms of mounting dimensions and electrical parameters. In addition, LED technology offers a number of key advantages over legacy incandescent bulbs.
Main advantages of the product
- High brightness— LED elements instantly reach full brightness, which is critical for the brake light and increases safety in traffic.
- Extended service life— LEDs last several times longer than conventional lamps, which means fewer replacements and downtime.
- Low power consumption— saving on-board electricity reduces the load on the generator and battery.
- Vibration resistance— the absence of a filament makes the flashlight immune to shaking, typical of trucks.
- Sealed design— protection from moisture, dust and road dirt ensures stable operation in harsh conditions.
- Full compatibility— bolt-on-bolt installation without the need for additional modifications.
Specifications of LED Tail Light DZ95189811211
Below are key parameters to help you verify compatibility and prepare specifications for ordering.
| Parameter | Meaning |
|---|---|
| OEM part number | DZ95189811211 |
| Applicability | SHACMAN (陕汽) F2000, F3000, X3000, H3000 series |
| Product type | LED tail lamp |
| Location | Rear body |
| Light source | LED (light emitting diodes) |
| Operating voltage | 24 V (DC) |
| Functions | Brake light, turn signal, side light, reverse |
| Degree of protection | IP67 |
| Housing material | ABS plastic + polycarbonate diffuser |
| Installation method | Bolt-on (Direct OEM Replacement) |
| Supplier brand | Mettlead |
| Origin | China (factory production) |
Application and compatibility: for which cars is the DZ95189811211 lamp suitable?
LED tail light DZ95189811211 is designed primarily for trucks of the brandSHACMAN(陕汽). It belongs to the category of body parts -rear lighting- and is installed as a standard element without modifications.
Adaptable Models
- SHACMAN F2000 - tractors and dump trucks
- SHACMAN F3000 - long-haul tractors and construction equipment
- SHACMAN X3000 - a new generation of truck tractors
- SHACMAN H3000 - a universal series for transportation
Thus, if your fleet includes SHACMAN models of the listed series, this LED tail light DZ95189811211 will be a reliable replacement for standard optics. At the same time, you retain full functionality and guarantee compliance with factory standards.
OEM/ODM capabilities and supply flexibility
CompanyMettleadis not just an intermediary, but a direct supplier with its own production base in China. That is why we offer flexible terms of cooperation for both wholesale distributors and service companies.
What we offer to partners
- White-label packaging— applying your brand to products and packaging for promotion under your own brand.
- Custom packaging— individual design of boxes and labels to suit the requirements of your market.
- Strict quality control— each LED tail light DZ95189811211 is tested for tightness, electrical parameters and light distribution before shipment.
- Competitive factory price— the absence of intermediate links allows you to reduce the purchase cost by 15–30% compared to the market price.
- Fast logistics— dispatch within 3–7 business days after order confirmation.
- Secure payment methods— T/T, L/C, Western Union, Alibaba Trade Assurance - choose the option convenient for you.
In addition, we invite partners to visit our warehouse and production in China to see for themselves the quality of products and the transparency of processes.
Real Customer Experience: How the DZ95189811211 LED Tail Light Solved a Vehicle Fleet Problem
One of our regular clients is a transport company from Uzbekistan that operates more than 80 SHACMAN F3000 trucks on routes throughout Central Asia. Previously, they used standard incandescent lamps, which failed every 2-3 months due to strong vibration and temperature changes.
After switching toLED tail light DZ95189811211 for SHACMANFrom Mettlead the situation has changed dramatically. During 12 months of operation, not a single lamp required replacement. As a result, maintenance costs for rear lighting equipment have been reduced by 60%, and equipment downtime has been reduced. The purchasing manager noted that “the lights cost the same as before, but last five times longer - this is the best investment in the safety of our fleet.”
These are the results that demonstrate why professionals choose original DZ95189811211 LED flashlights from a trusted supplier.
FAQ about DZ95189811211 LED Tail Light
Does the DZ95189811211 flashlight fit all SHACMAN models?
Yes, this DZ95189811211 LED tail light is compatible with SHACMAN's main series - F2000, F3000, X3000 and H3000. However, we recommend that you check the year of your vehicle when placing your order so that we can confirm full compatibility.
What is the actual service life of this LED flashlight?
Thanks to the use of high-quality LED chips, the average resource of the DZ95189811211 flashlight is more than 30,000 hours. In practice, this means 3–5 years of continuous operation without the need for replacement under normal operating conditions.
Is it necessary to modify the wiring when replacing a standard flashlight with an LED version?
No, the DZ95189811211 LED tail light is designed as a direct replacement for the original. Connectors, mounting holes and electrical parameters are fully consistent with SHACMAN factory specifications. Installation takes 10–15 minutes.
Will there be fogging inside the flashlight body?
The case has a degree of protection IP67, which eliminates the penetration of moisture. In addition, the design includes a drain valve to equalize pressure, preventing the formation of condensation due to temperature changes.
What is the minimum order quantity?
We work with both large wholesale orders and small batches of 10 units. To clarify the price and conditions for a specific volume, simply send us a request - we will prepare an individual offer within 24 hours.
Ready to order DZ95189811211 LED Tail Light for SHACMAN?
Don't waste time looking for unreliable intermediaries.Mettlead- your direct path to high-quality SHACMAN spare parts at factory prices. Send a request right now, and our manager will prepare a personal commercial offer taking into account the volume, timing and logistics to your warehouse.
Contact us todayto get the current price for the LED tail light DZ95189811211, find out stock availability and discuss the terms of long-term cooperation. We respond to inquiries within 12 hours - because we value your time as much as you do.
contact us
Related Popular Products
Turbine (Turbocompressor) VG1540110066
Spare parts for Sinotruk Howo truck engines. Injects air into the engine combustion chambers, increases engine power, and optimizes fuel consumption. Completely matches the geometric and technical parameters of the original, suitable for direct replacement of a worn turbine.
Main brake cylinder (pneumatic hydraulic booster) LG22-JLB SDLG 4120000675
Main brake cylinder with pneumatic hydraulic booster LG22-JLB art. 4120000675 for SDLG equipment. Strengthens the pressure of the brake pedal, generates the working pressure of the brake fluid, standard mounting dimensions for replacing the original brake system.
Front bumper outer panel Foton 1B20053100029
Front bumper outer panel 1B20053100029 for Foton truck. Protects the front of the body, meets factory dimensions to replace the original.
Brake drum AZ9112440001 Sinotruk
Brake drum AZ9112440001 for Sinotruk trucks. Made of wear-resistant cast iron, withstands heavy loads during braking, suitable for standard replacement of worn parts.
Front leaf spring assembly DZ95319690914 SHACMAN
Front leaf spring assembly DZ95319690914 for Shacman trucks. Takes the load of the front suspension, softens impacts when driving on uneven surfaces, is made of high-strength spring steel, and fully complies with factory parameters for replacing a worn-out chassis unit.
Generator A3008-3701100 Yuchai
Generator A3008-3701100 for Yuchai engine. It powers the on-board power supply and charges the battery, is vibration resistant, fits dimensions to replace the factory part.
Bevel gear 28-17 199014320251 Sinotruk
Bevel gear 28-17 art. 199014320251 for Sinotruk trucks. It is part of the main drive of the bridge, transmits torque at an angle, meets factory parameters to replace the original.
LED Tail Light DZ95189811212 for SHACMAN
LED tail light DZ95189811212 for Shacman truck. Combines a brake light, a parking light and a turn signal, LEDs have a long service life and low power consumption, a sealed housing protects against moisture and dust, standard fasteners for direct replacement of the original.
Cylinder block 61500010373
Cylinder block 61500010373 for Sinotruk engines. The main body part of the motor contains the piston group, lubrication and cooling channels, and fully corresponds to the original dimensions for replacement.
Center differential assembly WG9231320266
Center differential assembly WG9231320266 for Sinotruk Howo. Distributes torque between the front and rear axles, the kit is fully compatible with the original spare part of the truck.
Engine block 61500010373
Narrow cylinder block assembly art. 61500010373 for Weichai engines. Cast from high-strength cast iron, ready for installation, meets factory dimensions, suitable for repairing power units of trucks.
Flange KOHM QH50-4211206-12
Flange KOHM QH50-4211206-12. Made of high-strength alloy, the connecting part of the gearbox power take-off allows for the installation of a hydraulic pump, standard mounting dimensions to replace the original.
Flywheel 612630020051
Flywheel 612630020051 for Sinotruk engines. Accumulates the rotational inertia of the crankshaft, serves as the contact surface of the clutch disc, and is suitable for direct replacement of the original part.
Bolt with tooth nut 805002221/01B1529+03B0047
Tooth bolt and nut kit 805002221/01B1529+03B0047. Fastening element for transmission gears, withstands mechanical loads, suitable for replacing standard parts.
Sinotruk Tail Marker Light WG9925720005
Tail marker light WG9925720005 for Sinotruk trucks. The durable housing is resistant to moisture and temperature changes, standard mounting dimensions for quick replacement of the original part.
Stabilizer bushing Sinotruk 199100680067
Stabilizer bushing with number 199100680067 for Sinotruk trucks. Made from high-quality rubber, it reduces suspension vibrations and is fully sized to replace a worn part.
